Belt Manlift Parts Listing

To order any of the manlift parts below or to find out information on another manlift part, please call 507-334-6193 or use our Manlift Parts Request Form.

Manlift Parts for the Humphrey Manlift

  • Van Gorp Head Pulley Complete: This head pulley is available in numerous sizes. We have 12″ x 20″, 14″ x 20″ and 16″ x 20″. We can provide this pulley in numerous bore sizes. The pulley comes lagged.
  • Head Pulley Lagging with Drive Screws: Lagging is 64-1/2″ of 12″, 14″ or 16″ rough top lagging. 50 Drive Screws are included. – Part Nos. P-259-12, P-259-14, P259-16
  • Drive Screws for Lagging: 50 are required per pulley. – Part No. P-262
  • L-42 Hi-Box Complete, Closed, with L-27 end cap, bearing, oil seal & gasket – Part No. SAH-6D1
  • L-42B Hi-Box Complete, Open, with L-27 end cap, bearing, oil seal & gasket – Part No. SAH-6D2
  • L-42HB Hi-Box Complete, Open, with L-27 end cap, bearing, oil seal & gasket – Part No. SAH-6D3 Pillow Block, Sealmaster, 2-11/16″ – Part No. P-340
  • Pillow Block, Sealmaster, 2-11/16″, left hand side – Part No. P-340L
  • Pillow Block, Sealmaster, 2-11/16″, right hand side – Part No. P-340R
  • Pillow Block Supports for 2-11/16″ Bearings – Part No. P-341
  • L-27 End Cap Complete. With Bearing & Oil Seal, for L-42, L-42B & L-42HB – Part No. SAH-3E2
  • Hi-Box, Finished Casting, Closed, Right – Part No. L-42
  • Hi-Box, Finished Casting, Open, Left – Part No. L-42B
  • Hi-Box, Finished Casting, Open, Right – Part N0. L-42HB
  • Finished Casting, End Cap. One for each Hi-Box – Part No. L-27
  • Gasket, Round, .013 Red Rope Paper. One for each L-27 End Cap – Part No. P-229
  • Bearing, Self-Aligning, 2-3/16″. One for each L-27 End Cap – Part No. P-298
  • Oil Seal, 3/8 x 2-3/16″. One for each L-27 End Cap – Part No. P221GS
  • Zerk, #1610, One for each Hi-Box – Part No. P231
  • Screw, Cap, Hex Head 1/2 X 1″, for attaching L-27 End Caps to Hi-Boxes – Part No. P230
  • Head Circle – Part No. L-16C-H
  • Control Arm Complete, with Conduit Box & Mercury Switch – NEMA 4 or 12 – Part No. SAH-6E-45
  • Control Arm Complete, with Conduit Box & Mercury Switch – NEMA 7 or 9 – Part No. SAH-6E-79
  • Flexible Coupler, Coupler available in numerous bore sizes – Part No. L-70 Coupler
  • Flexible Coupler – NEUPEX, coupler available in numerous bore sizes
  • Coupler Guard for Flexible Coupler
  • Centrifugal-force Operated “Saf-T-Stop” Brake
  • Foot Assembly Complete, with Legs, Circles, Foot Pulley, Foot Shaft, Bearing Boxes, Take-up Bolts and Anchor Plates. For 12″, 14″ of 16″ Belt Manlift – Part Nos. SAH-5-12, SAH-5-14, SAH-5-16
  • L-8 Leg Complete, with Bearing Boxes Complete & Take-up Bolts – Part No. SAH-5A
  • L-6SA Bearing Box Complete, with self-aligning bearings. Part No. SAH-5B
  • L-20 & L-23 Rope Sheave Complete. For control rope. Part No. SAH-5C
  • Van Gorp Foot Pulley Complete. This foot pulley is available in numerous sizes. We have 12″ x 20″, 14″ x 20″ and 16″ x 20″. We can provide this pulley in numerous bore sizes.
  • Leg, Finished Casting Only – Part No. L-8
  • Foot Circle – Part No. L-16C-F
  • Bearing, Flanged 1-5/8″ – Part No. P-241
  • Rope Sheave Case, Finished Casting – Part No. L-20
  • Rope Sheave Wheel, Finished Casting – Part No. L-23
  • Rope, Galvanized Wire Center, 3/8″. Start-Stop Control Rope. Sold by the foot – Part No. P-282A
  • Rope Guide, with Bolts. For Start-Stop Control Rope – Part No. L-48RL
  • Debris Deflector. Available for 12″, 14″ & 16″ Belt Manlifts – Part Nos. M-307-12, M-307-14, M-307-16
  • Clamp, Rope, for 3/8″ Control Rope – Part No. 7AC375
  • Thimble, Rope, 3/8″ for Control Rope – Part No. 7AD375
  • In-Rail Stop Device, Bottom, OPAR Micro Switch. For NEMA 4 or NEMA 12 Conditions – Part No. SAH-14B1
  • In-Rail Stop Device, Bottom, OP-XR3 Micro Switch. For NEMA 4 or NEMA 12 Conditions – Part No. SAH-14B2
  • In-Rail Stop Device, Bottom, EXAR Micro Switch. For NEMA 7 or NEMA 9 Conditions – Part No. SAH-14B3
  • In-Rail Stop Device, Bottom, EX-XR3 Micro Switch. For NEMA 7 or NEMA 9 Conditions – Part No. SAH-14B4
  • In-Rail Stop Device, Left, OPAR Micro Switch. For NEMA 4 or NEMA 12 Conditions – Part No. SAH-14L1
  • In-Rail Stop Device, Left, OP-XR3 Micro Switch. For NEMA 4 or NEMA 12 Conditions – Part No. SAH-14L2
  • In-Rail Stop Device, Left, EXAR Micro Switch. For NEMA 7 or NEMA 9 Conditions – Part No. SAH-14L3
  • In-Rail Stop Device, Left, EX-XR3 Micro Switch. For NEMA 7 or NEMA 9 Conditions – Part No. SAH-14L4
  • In-Rail Stop Device, Right, OPAR Micro Switch. For NEMA 4 or NEMA 12 Conditions – Part No. SAH-14R1
  • In-Rail Stop Device, Right, OP-XR3 Micro Switch. For NEMA 4 or NEMA 12 Conditions – Part No. SAH-14R2
  • In-Rail Stop Device, Right, EXAR Micro Switch. For NEMA 7 or NEMA 9 Conditions – Part No. SAH-14R3
  • In-Rail Stop Device, Right, EX-XR3 Micro Switch. For NEMA 7 or NEMA 9 Conditions – Part No. SAH-14R4
  • Overhead Stop Device, 12″, OPAR Micro Switch. For NEMA 4 or NEMA 12 Conditions – Part No. SAH-12A
  • Overhead Stop Device, 12″, EXAR Micro Switch. For NEMA 7 or NEMA 9 Conditions – Part No. SAH-12AX
  • Overhead Stop Device, 14″, OPAR Micro Switch. For NEMA 4 or NEMA 12 Conditions – Part No. SAH-12B
  • Overhead Stop Device, 14″, EXAR Micro Switch. For NEMA 7 or NEMA 9 Conditions – Part No. SAH-12BX
  • Overhead Stop Device, 16″, OPAR Micro Switch. For NEMA 4 or NEMA 12 Conditions – Part No. SAH-12C
  • Overhead Stop Device, 16″, EXAR Micro Switch. For NEMA 7 or NEMA 9 Conditions – Part No. SAH-12CX
  • Micro Switch, OPAR. Used on SAH-14 and SAH-12 Stop Devices. For NEMA 4 or NEMA 12 Conditions – Part No. P-307-4
  • Micro Switch, OP-XR3. Unsed on SAH-14 and SAH-12 Stop Devices. For NEMA 4 or NEMA 12 Conditions – Part No. P-307-4X
  • Micro Switch, EXAR. Used on SAH-14 and SAH-12 Stop Devices. For NEMA 7 or NEMA 9 Conditions – Part No. P-307-9
  • Micro Switch, EX-XR3. Used on SAH-14 and SAH-12 Stop Devices. For NEMA 7 or NEMA 9 Conditions – Part No. P-307X-9
  • Stop Device Plate, Left, Less Micro Switch. For SAH-14 Stop Devices – Part No. M-325L
  • Stop Device, Plate, Right, Less Micro Switch. For SAH-14 Stop Devices – Part No. M-325R
  • Plunger for SAH-14, Top – Part No. M-306A
  • Moveable Safety Cone Hood, 12″, NEMA 4 or NEMA12 – Part No. M-301-12
  • Moveable Safety Cone Hood, 14″, NEMA 4 or NEMA 12 – Part No. M-301-14
  • Moveable Safety Cone Hood, 16″, NEMA 4 or NEMA 12 – Part No. M-301-16
  • Moveable Safety Cone Hood, 12″, NEMA 7 or NEMA 9 – Part No. M-301-12X
  • Moveable Safety Cone Hood, 14″, NEMA 7 or NEMA 9 – Part No. M-301-14X
  • Moveable Safety Cone Hood, 16″, NEMA 7 or NEMA 9 – Part No. M-301-16X
  • Stationary Safety Cone Hood, 12″ – Part No. M-302-12
  • Safety Cone Hood, 14″ – Part No. M-302-14
  • Stationary Safety Cone Hood, 16″ – Part No. M-302-16
  • Treadle Complete, 12″, OPAR – Part No. M-304-12A
  • Treadle Complete, 12″, EXAR – Part No. M-304-12B
  • Treadle Complete, 12″, OP-XR3 – Part No. M-304-12C
  • Treadle Complete, 12″, EX-XR3 – Part No. M-304-12D
  • Treadle Complete, 14″, OPAR – Part No. M-304-14A
  • Treadle Complete, 14″, EXAR – Part No. M-304-14B
  • Treadle Complete, 14″, OP-XR3 – Part No. M-304-14C
  • Treadle Complete, 14″, EX-XR3 – Part No. M-304-14D
  • Treadle Complete, 16″, OPAR – Part No. M-304-16A
  • Treadle Complete, 16″, EXAR – Part No. M-304-16B
  • Treadle Complete, 16″, OP-XR3 – Part No. M-304-16C
  • Treadle Complete, 16″, EX-XR3 – Part No. M-304-16D
  • Ladder Rungs, with Bolts – Part No. M-313A

back to top

Manlift Parts for Barnard & Leas Manlift

  • Step Complete, 12”, L-75 Rollers and Riveted Pins – Part No. SAH2AC-BL-R
  • Step Complete, 12”, L-75 Rollers and Threaded Pins – Part No. SAH2AC-BL-T
  • Step Complete, 14”, L-75 Rollers and Riveted Pins – Part No. SAH2BC-BL-R
  • Step Complete, 14”, L-75 Rollers and Threaded Pins – Part No. SAH2BC-BL-T
  • Step Complete, 16”, L-75 Rollers and Riveted Pins – Part No. SAH2CC-BL-R
  • Step Complete, 16”, L-75 Rollers and Threaded Pins – Part No. SAH2CC-BL-T
  • Step Bracket, Finished – Part No. L-71-312
  • Step Bracket, Finished – Part No. L-71-535
  • Step Bracket, Finished – Part No. L-71-953
  • Step Bracket, Finished – Part No. L-71-954
  • Step Bar, 12” – Part No. M-138CN-12BL
  • Step Bar, 14” – Part No. M-139CN-14BL
  • Step Bar, 16” – Part No. M-140CN-16BL
  • Step Tread, 12”. with Safety-walk – Part No. M-134CM-12BL
  • Step Tread, 14”, with Safety-walk – Part No. M-135CM-14BL
  • Step Tread, 16”, with Safety-walk – Part No. M-136CM-16BL
  • Step Roller Pin, Riveted Type – Part No. P-202-3BL
  • Step Roller Bolt with Lock Nut, Threaded Type – Part No. P-202-6BL
  • Head Arch – Part No. L-16C-BL
  • Boot Arch – Part No. L-16CB-BL

back to top

Manlift Parts for Allis-Chalmers Manlift (also known as Nordyke Manlift, Marmon Manlift)

  • Step Complete, 12” A.C. w/Metal Treads – Part No. NM800-118-75-Z
  • Step Complete, 12” A.C. w/Metal Treads – Part No. NM800-118-75N-Z
  • Step Complete, 14” A.C. w/Metal Treads – Part No. NM800-119-75-Z
  • Step Complete, 14” A.C. w/Metal Treads – Part No. NM800-119-75N-Z
  • Step Complete, 16” A.C. w/Metal Treads – Part No. NM800-120-75-Z
  • Step Bracket, Allis-Chalmers, Finished. Right hand bracket – Part No. NM-20455R
  • Step Bracket, Allis-Chalmers, Finished. Left hand bracket – Part No. NM-20455L
  • Step Bar, 12” Allis-Chalmers, Finished (step support bar) – Part No. M-138CN-12NM
  • Step Bar, 14” Allis-Chalmers, Finished (step support bar) – Part No. M-139CM-12NM
  • Step Bar, 16” Allis Chalmers, Finished (step support bar) – Part No. M-140CN-16NM
  • Take-up Bearing 1-11/16” Bore – Foot Shaft Bearing – Part No. NMQ-70138
  • Boot Stand, Allis-Chalmers, Finished – Part No. NM-20441-3

back to top

Manlift Parts for Viola Manlift

  • Step Complete, 12”, with Type “R” Rollers – Part No. SAH2AC-V
  • Step Complete, 14”, with Type “R” Rollers – Part No. SAH2BC-V
  • Step Complete, 16”, with Type “R” Rollers – Part No. SAH2CC-V
  • Step Tread, 12”, with Safety-walk – Part No. M-134CM-12V
  • Step Tread, 14”, with Safety-walk – Part No. M-135CM-14V
  • Step Tread, 16”, with Safety-walk – Part No. M-136CM-16V
  • Step Bar, 12” – Part No. M-138CN-12V
  • Step Bar, 14” – Part No. M-139CN-14V
  • Step Bar, 16” – Part No. M-140CN-16V

back to top

Manlift Safety Signs

  • “TOP FLOOR – GET OFF” Manlift Sign – Part No. 7AF001
  • “BOTTOM FLOOR – GET OFF” Manlift Sign – Part No. 7AF002
  • “NOTICE, etc.” 14 x 20″ Manlfit Sign – Part No. 7AF003
  • “MANLIFT INSTRUCTIONS, etc.” Manlift Sign – Part No. 7AF004
  • Manlift Safety StickersRequest FREE of Charge