Showing 1–40 of 137 results
-
“NOTICE, etc.” 14 x 20″ Manlift Sign Part No. 7AF003
-
“BOTTOM FLOOR – GET OFF” Manlift Sign
-
“MANLIFT INSTRUCTIONS, etc.” Manlift Sign
-
“TOP FLOOR – GET OFF” Manlift Sign
-
Bearing, Self-Aligning, 2-3/16″. One for each L-27 End Cap
-
Clamp, Rope, for 3/8″ Control Rope
-
Control Arm Complete, with Conduit Box & Mercury Switch – NEMA 4 or 12
-
Control Arm Complete, with Conduit Box & Mercury Switch – NEMA 7 or 9
-
Coupler Guard for Flexible Coupler
-
Debris Deflector. Available for 12″, 14″ & 16″ Belt Manlifts – Part Nos. M-307-12, M-307-14, M-307-16
-
Drive Screws for Lagging
-
Finished Casting, End Cap. One for each Hi-Box
-
Flexible Coupler – NEUPEX, coupler available in numerous bore sizes
-
Flexible Coupler, Coupler available in numerous bore sizes
-
Gasket, Round, .013 Red Rope Paper. One for each L-27 End Cap
-
Handhold, Guarded, with Bolts
-
Handhold, Viola, with Bolts Part
-
Head Circle
-
Head Pulley Complete
-
Head Pulley Lagging with Drive Screws
-
Head Pulley Lagging with Drive Screws
-
Head Pulley Lagging with Drive Screws
-
Head Shaft
-
Hi-Box, Finished Casting, Closed, Right
-
Hi-Box, Finished Casting, Open, Left
-
Hi-Box, Finished Casting, Open, Right
-
Humphrey Step
-
In-Rail Stop Device, Bottom, EX-XR3 Micro Switch. For NEMA 7 or NEMA 9 Conditions
-
In-Rail Stop Device, Bottom, EXAR Micro Switch. For NEMA 7 or NEMA 9 Conditions
-
In-Rail Stop Device, Bottom, OP-XR3 Micro Switch. For NEMA 4 or NEMA 12 Conditions
-
In-Rail Stop Device, Bottom, OPAR Micro Switch. For NEMA 4 or NEMA 12 Conditions
-
In-Rail Stop Device, Left, EX-XR3 Micro Switch. For NEMA 7 or NEMA 9 Conditions
-
In-Rail Stop Device, Left, EXAR Micro Switch. For NEMA 7 or NEMA 9 Conditions
-
In-Rail Stop Device, Left, OP-XR3 Micro Switch. For NEMA 4 or NEMA 12 Conditions
-
In-Rail Stop Device, Left, OPAR Micro Switch. For NEMA 4 or NEMA 12 Conditions
-
In-Rail Stop Device, Right, EX-XR3 Micro Switch. For NEMA 7 or NEMA 9 Conditions